Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) 2-STP CHMDRNCE BIO 0.51MM 6PK
Masterflex Ismatec Pump Tubing, 2-Stop, Chem-Durance Bio, 0.51 mm ID; 6/PK, Avantor
Pacer Global LLC Saint-Gobain - SaniTech Ultra-C Tubing, 0.15625'' ID, 0.40625'' OD, 0.125'' Wall, 50 Foot Coil, 1/EA - ULTRA-C-156-4F
Saint-Gobain - SaniTech Ultra-C Tubing, 0.15625" ID, 0.40625" OD, 0.125" Wall, 50 Foot Coil, 1/EA
Cole-Parmer Thermoplastic (SEBS) Tubing, 3/16" ID x 5/16" OD; 50 Ft
Designed for the most demanding biopharmaceutical applications, the thermoplastic SEBS (styrene-ethylene-butylene-styrene) tubing exhibits superior gas barrier properties and excellent pressure performance. Use the tubing in peristaltic pumps, single-use assemblies, process filling, and sampling devices.
Thermoplastic (SEBS) tubing does not contain BPA, phthalates, PVC, or peroxides that can leach out into the fluid, making it ideal for pharmaceutical applications, buffer and media preparation, and cell media processing. For an added level of particle control, a liner is placed between the tubing package and the box.
Cole-Parmer C-Flex 072 TPE Tubing, 3/8" ID x 1/2" OD, 50 Ft; Saint Gobain 072-375-2
Excellent heat seal and sterile weld capabilities make it ideal for biopharmaceutical applications
Easily meet the critical demands of pharmaceutical and biopharmaceutical applications with C-Flex TPE tubing. This moldable and bondable tubing is specifically designed for aseptic welding connections and sealing disconnection; seal or weld before or after sterilization depending on your application requirements.
Excellent flexibility and durability offer prolonged service life in peristaltic pumps and help minimize downtime due to tubing failures. The low permeability characteristics protects sensitive fluids from gas ingress.
Accuflow Systems 1 Inch Silicone Hose
1 Inch ID Platinum Cured Wire Reinforced Silicone Hose 72 Inches OAL
AVANTOR MASTERFLEX (VWR LLC) 2-STP CHMDRNCE BIO 2.06MM 6PK
Masterflex Ismatec Pump Tubing, 2-Stop, Chem-Durance Bio, 2.06 mm ID; 6/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP CHMDRNCE BIO 1.14MM 6PK
Masterflex Ismatec Pump Tubing, 2-Stop, Chem-Durance Bio, 1.14 mm ID; 6/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP PHARMED 2.54MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, PharMed BPT, 2.54 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX PHARMED 82 10/CS
Masterflex I/P Bulk-Packed Precision Pump Tubing, PharMed BPT, I/P 82; 25 ft, 10/Cs, Avantor